Masks, Overall, Socks

Products: Military Gas Mask
Item no.: FWB16

1. APPLICATION AND FEATURE
The FWB16 gas mask is an individual protective equipment,which consists of a head harness type facepiece, a corrugated hose and a canister. The FWB16 mask can provide effective pro- atory organs, eyes and facial skin. The facepiece can be fit-ted with different canisters according to the protection requirements. A small canister can directly be connected to the facepiece of this mask is very wide. The MF 12 mask can be used by military, police, civil defense, emergency,and fire personnel or in industry, agriculture,scientific research etc.
The FWB16 mask has large triangular eyepieces,which provide a wide visual field. The lenses are manufactured from optical plastic and surface treated specially to have high strength and abrasion resistance. A new-type air guide is provided inside the facepiece to separate in coning and outgoing airflows and so avoids the lenses misting over.

2. SPECIFICATIONS
when the facepiece of the FWB16 mask is fitted with a FWB14 canister,specifications are as follows:
(1) Gas life Cyanogen chloride: not less than 50 minutes at 30 L/min,1.5mg/L,80-80% RH conditions. Hydrocyanic acid: not less than 50 minutes at 30 L/min, 3mg/L conditions.
(2) Oil mist penetration coefficient: not more than 0.005% at 30L/min.
(3) Inhalation resistance: not more then 186 Pa at 30 L/min.
(4) Exhalation resistance: not more then 100 Pa at 30L/min
(5) Visual field: total not less than 75%,binocular visual field not less than 30%
(6) Storage life: 8 years

3. MAINTRNANCE AND USR
(1).The FWB16 is available in three sizes (large, medium, small). The mask size is marked on the left lower part of the face blank with a number: 3 (large), 2(medium) or 1 (small). The user can choose a suitable mask according to the user’s eyes after the mask has been worn are at the horizontal center line of lenses, it is shown that the selected size of the mask is suitable. If the eyes are above the value of 10 mm, mask is too small. If the eyes are below the value, mask is too large.
(2).Wipe sweat and dirt off the inter and the outside of the facepiece after use of the facepiece after use of the mask, particularly keep the lenses and the expiratory valve clean. If necessary, the lenses and the expiratory valve may be washed with clear water.
(3)The gas masks should be stored in a cool dry place. If the masks are not in use for a longer time, a support should be placed in each face blank. The masks are in no contact with organic solvents such as benzine etc and not stored in pile at random to stored in pile at random to prevent the deformation of face blanks.
(4).The closure cap and the plug should usually be attached to the canister to prevent the ingress of moisture.